Make Bootable Pen Drive using dos for windows 7

Install Window 7/8 within 5 minutes from Pen Drive (using dos)

Hey friends, in this article I am going to explain you how to install window 7 to your computer from Pen Drive. You are now thinking that why should we install windows from USB/Pen Drive? When I can just pop up a DVD I bought and install that way. Well the difference is that the Pen Drive is based on flash memory the read/write speed will be significantly faster than any DVD. So you can easily install windows within 5-10 minutes instead of 20-30 minutes.
So let start and just follow the steps given below:

Insert your pen drive into the computer which should be 4 GB (Gigabytes) or more.
Empty/Format the pen drive.
Open the command prompt and make sure you should “Run as administrator” otherwise this will not work.
Now type in command prompt “diskpart” and press enter.
Now you have a new prompt called “DISKPART” now type in it “list disk” and press enter.
Make sure don’t select your main hard drive.
Now type “select disk 5” and press enter. Note: 5 is that drive where we want to install windows it may be anything.
Now you see “Disk 5 is now the selected disk”.
Now type “clean” and press enter.
This will clean the disk.
Now type “create partition primary” and press enter.
Now you see “Disk part succeeded in creating the specified partition”.
Now type “select partition 1” and press enter.
Now type “active” and press enter.
Now you see “Disk part marked the current partition is active”.
Now type “format fs=NTFS quick” and press enter. Note: make sure use quick at the end otherwise the format take very much time.
Now you see “Disk part successfully formatted the volume”.
Now type “assign” and press enter.
Now you see”Disk part successfully assigned the drive letter or mount point”.
Now type ”exit” and press enter.
And type “exit” ones more.
Now open up the Pen drive.
Now you have to drag the contents of windows 7 DVD into the pen drive or you may have to extract them from the DVD into your Flash memory.
After copy all the contents of windows 7 into the pen drive just reboot your computer.
And make sure it will set to boot from a Flash Drive.
That’s all you should now install your windows from a Pen Drive.

Just choose usb drive as first boot drive in BOIS
If you like this article please do share it by by clicking on any social button & don't forgot to comment.
keep visiting...
Must Read: Make Bootable Pendrive Using Software

Incoming Links

ValidTuts

Popular Posts

Category 1

Make Bootable Pen Drive using dos for windows 7

Install Window 7/8 within 5 minutes from Pen Drive (using dos)

How To Make Pendrive Bootable

make pendrive bootable